Double Component Epoxy adhesive Glue for chuck flap wheel
A:B = 2:1
Color: Blue / White
Viscosity (25℃, mpa.s): 15000~20000
Storage time: 5℃ 1 year
Hardness(Shore D): ≥90
Usage:
Dosage: A:B = 2:1 Mix A and B glue uniformly together
Operating time after A and B mixed together: better 45 minutes
Heating Time: 95 degree of 2 hours (after oven reach 95 degree then keep 2 hours)
Note:
l For making coarse grit of 80#, put 30% Heavy Calcium Carbonate Powder mixed uniformly together
l For making 40-60# grit, put 50% Heavy Calcium Carbonate Powder and mix uniformly together, this is depends on the real situation of different abrasive cloth, you can test some small quantity before using
l Calcium Carbonate Powder is heavy type, please do not use light Calcium Carbonate Powder
When put the finished products to oven, please keep them dry after glue, please keep around 30-50 minutes before oven
Composition/Information on Ingredient for single component epoxy adhesive for flap disc
Chemical Name | CAS No. | Ratio of Constituents |
Epoxy resin | 61788-97-4 | 55% |
Calcium carbonate | 471-34-1 | 39.5% |
Dicyandiamide | 461-58-5 | 5% |
Titanium oxide | 1317-80-2 | 0.5% |
Tel:+86 371 63392702
Fax :+86 371 63392702
Mobile:+86 18538716382
E-mail: info@dj-abrasive.com
Skype: +8618538716382
Whatsapp: +86-18538716382